Velowave | Controller Replacement for Pony Electric Ebike

Velowave | Controller Replacement for Pony Electric Ebike | 20050285

SKU: 20050285

$159.00

🚚 Free Shipping & No Sales Tax (some exclusions apply)

📦 Fast 4-7 Day Delivery

❓ Questions? Email us support@discoveranddo.com Call Our Experts 1-833-657-4927

Replacement Controller for Pony Electric eBike

Overview

This replacement controller restores reliable motor and pedal-assist control for Pony electric eBikes. Designed to match common Pony wiring and inputs, it gets your bike back on the road with predictable throttle response and safety protections.

Benefits

Get your e-bike riding again quickly without a long repair wait.
Enjoy smoother, more consistent acceleration and throttle behavior.
Restore pedal-assist levels so your rides feel natural and efficient.
Reduce service time and cost by using a plug-and-play compatible unit.
Ride with greater confidence thanks to built-in electrical protections and proper brake cutoff handling.

Features

Supports throttle input and pedal-assist system (PAS) signals.
Compatible with hall-sensor brushless hub motors.
Over-voltage, under-voltage and over-current protection logic.
Brake signal input for motor cut-off when braking.
LED status indicator for quick diagnostics during installation and troubleshooting.
Plug-and-play connector layout designed to match common Pony eBike harnesses (model-dependent).
Compact die-cast aluminum enclosure for heat dissipation and durability.

Specifications

Compatible voltages: 36 V or 48 V options (model-dependent).
Rated continuous current: typically 20 A (varies by model); peak current up to ~35 A (model-dependent).
Maximum supported motor power: up to approximately 500 W (depends on controller model and motor).
Supported inputs: throttle (0–5 V or hall throttle), PAS sensor input, brake cut-off, speed sensor/hall inputs.
Protections: over-current, over-voltage, under-voltage, short-circuit protection.
Enclosure: die-cast aluminum housing for thermal stability; IP65-like sealing on common variants (model-dependent).
Connectors: multi-pin waterproof connector for motor/hall sensors, separate plugs for throttle, PAS, brakes (connector type varies by unit).
Dimensions: approximately 85 x 60 x 30 mm (approximate; depends on model).
Weight: around 150–220 g (approximate).
Operating temperature range: typically -20 °C to +60 °C.
Included accessories: controller unit, wiring harness or adapter (depending on SKU), basic installation instructions.

Free standard shipping on all U.S. orders. Orders are typically processed within 1–2 business days (Mon–Fri). Delivery usually takes 4–7 business days after dispatch. Tracking details are emailed once your order ships. View full Shipping Policy .

For help, contact us at support@DiscoverAndDo.com or call 1-833-657-4927 (Mon–Fri, 9 AM–6 PM EST).

Enjoy easy returns within 30 days of delivery. Items must be unused, undamaged, and in original packaging. Change-of-mind returns may be subject to a 25% restocking fee. Defective, damaged, or incorrect items are fully covered with free return shipping and a replacement or full refund. View full Returns & Refund Policy .

For help, contact us at support@DiscoverAndDo.com or call 1-833-657-4927 (Mon–Fri, 9 AM–6 PM EST).

Description

Replacement Controller for Pony Electric eBike

Overview

Benefits

Get your e-bike riding again quickly without a long repair wait.
Enjoy smoother, more consistent acceleration and throttle behavior.
Restore pedal-assist levels so your rides feel natural and efficient.
Reduce service time and cost by using a plug-and-play compatible unit.
Ride with greater confidence thanks to built-in electrical protections and proper brake cutoff handling.

Features

Supports throttle input and pedal-assist system (PAS) signals.
Compatible with hall-sensor brushless hub motors.
Over-voltage, under-voltage and over-current protection logic.
Brake signal input for motor cut-off when braking.
LED status indicator for quick diagnostics during installation and troubleshooting.
Plug-and-play connector layout designed to match common Pony eBike harnesses (model-dependent).
Compact die-cast aluminum enclosure for heat dissipation and durability.

Specifications

Compatible voltages: 36 V or 48 V options (model-dependent).
Rated continuous current: typically 20 A (varies by model); peak current up to ~35 A (model-dependent).
Maximum supported motor power: up to approximately 500 W (depends on controller model and motor).
Supported inputs: throttle (0–5 V or hall throttle), PAS sensor input, brake cut-off, speed sensor/hall inputs.
Protections: over-current, over-voltage, under-voltage, short-circuit protection.
Enclosure: die-cast aluminum housing for thermal stability; IP65-like sealing on common variants (model-dependent).
Connectors: multi-pin waterproof connector for motor/hall sensors, separate plugs for throttle, PAS, brakes (connector type varies by unit).
Dimensions: approximately 85 x 60 x 30 mm (approximate; depends on model).
Weight: around 150–220 g (approximate).
Operating temperature range: typically -20 °C to +60 °C.
Included accessories: controller unit, wiring harness or adapter (depending on SKU), basic installation instructions.